Sniffing the Network

This article is intended to provide a simple demonstration of how easy it is to sniff/intercept traffic on various types of networks, and serve as a warning to utilize secure methods of communication on a) untrusted networks and b) known networks with the potential for untrusted clients or administrators. The first consideration is the topology of the network we’re connected to. To consider 5 common scenarios: Wired ethernet hub network: Hubs are becoming more and more obsolete as they are changed to switches. Multiple devices can be connected to a hub, and any data received by the hub from one device is broadcast out to all other devices. This means that all devices receive all network traffic. Not only is this an inefficient use of bandwidth, but each device is trusted to accept traffic destined for itself and to ignore traffic destined for another node. To sniff such a network, a node simply needs to switch it’s network interface card to “promiscuous mode”, meaning that it accepts all traffic received. Wired ethernet switched network: Multiple devices can be connected to a switch, however a switch has greater intelligence than a hub. The switch will inspect the traffic sent on each port, and learn the hardware (MAC) address of the client connected to a particular port. Once learned, the switch will inspect any frames it receives on a port, and forward that frame to the known recipient’s port alone. Other devices connected to the switch will not receive traffic that is not destined for them. This offers enhanced bandwidth usage over a hub. Switches rely on ARP packets which are easily forged in order to learn which devices are on which ports. Wireless open networks: Multiple devices can connect to an open wireless network. All data is broadcast across the network in plain text, and any attacker can sniff/intercept traffic being broadcast across the network. An open wireless network may present the user with a form of hotspot login page before granting internet access, however this does not detract from the network itself being open. WEP encrypted wireless network: A WEP encrypted network requires a WEP key to encrypt and decrypt network traffic. WEP has long been an outdated and insecure method of wireless network protection, and cracking a wireless network’s WEP key is fast and requires low skill. WEP is not secure. In addition, all clients connected to the network use the same WEP key to connect. That results in any user on the network with the WEP key being table to view any traffic transmitted to and from other nodes on the network. WPA/WPA2 encrypted network: A WPA/WPA2 encrypted network is significantly more secure than a WEP network. Whilst attacks exist on parts of the protocol, and extensions such as WPS, no known attack is able to recover a complex WPA/WPA2 password within an acceptable period of time. Whilst all clients connect to the network with the same password, the protocol is engineered to create different keystreams between each connected client and the access point. This means that simple sniffing in the traditional sense is not possible on the network. […]